Installation guide

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes
12
CONFIGURABLE BLF KEY BEHAVIOR WHEN IN AN ACTIVE CALL
Administrators can now configure the phone’s behavior when a BLF softkey is pressed during
an active call. If the "blf key mode" parameter is defined as "0" (default), the BLF number will
be sent as DTMF tones in the active call. If defined as "1", the active call will be placed on hold
and the phone will place a call to the BLF number using the next available line.
Configuring BLF Key Behavior When in an Active Call
Use the following parameter to configure BLF key behavior:
PARAMETER
blf key mode
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
DESCRIPTION
Specifies the behavior when a BLF key is pressed during an active call.
If
the parameter is defined as "0" (default), the BLF number will be
sent as DTMF tones in the active call. If defined as "1", the active
call will be placed on hold and the phone will place a call to the BLF
number using the next available line
FORMAT Integer
DEFAULT VALUE 0
RANGE 0 - 1
0 (DTMF in active call)
1 (Active call placed on hold and BLF number dialed out using the next
available line)
EXAMPLES blf key mode: 1