User guide

70 6510 UM Client Application User Guide
Web Client
Connecting to the Web Client
In order to access your 6510 UM account over the Internet, you must first start the
Web Client.
Note: Before using this application, make sure that SSL has been
enabled on the Web Client. Check with your System
Administrator if you are not sure if this has been done.
 To connect to the Web Client:
1. Open your browser (using Microsoft Explorer 6.0 or greater or
Netscape Navigator 6.2 or greater). The Web Client screen
appears.
2. In the Address field, enter the IP address of the UM server
followed by /um and click Go.
Note: If you do not know the proper IP address, contact your
Network Administrator.
3. Click Web Client. The Web Client dialog appears.
4. Select a language interface from the selection on the left hand
side.
Note: The default is English.
5. In the Mailbox field, enter your mailbox number.
6. From the Company drop down list, select a company (if there are
multiple companies in the UM system).
7. In the Password field, enter your password and click Login. The
Top\Inbox\ screen appears.
Note: If you are accessing the Web Client from your computer
where the UM Client Manager is installed, then you may
right-click on the Client Manager icon and select My UM
Inbox to launch your Web Client mailbox.