User guide

Navigate the Menu
71
Display Settings
Screen Saver
1. Select “Display”.
2. Select “Screen saver”.
3. Select “Information”, or “Black””, or “Black also in call”. Time, Owner ID and status infor-
mation is displayed when “Information” is selected, and the display will turn off when the
handset is not used.
4. Press “Back”.
Brightness
1. Select “Display”.
2. Select “Brightness”.
3. Select “Normal” or “Power save”.
4. Press "Back".
Contrast
1. Select “Display”.
2. Select “Contrast”.
3. Increase/decrease the contrast by pressing and on the Navigation key.
4. Press "Back".
Rotate Display Text
The handset may be configured to show the contents of the display (except the soft key bar)
upside-down at incoming calls or messages. This setting makes it possible to check the display
while the handset remains clipped to a belt or pocket. The display will revert to normal when
any key is pressed (except up/down on the Navigation key).
1. Press “Menu”.
2. Select “Settings” in the menu.
3. Select “Display”.
4. Select “Rotate display text”.
5. Select “Normal” or “Inverted”.
6. Press “Back” repeatedly until the idle screen appears.
Note: It is recommended to only use the screen saver setting “Black also in call”,
when extended battery life is needed. Use also other screen saver settings than
“Black also in call” if the handset needs to be set to silent (muted).
Tip: When using the screen saver “Information”, the Owner ID is also shown when
the handset is in the charger (even if switched off). This simplifies identification when
many handsets are charged together.