User guide

Navigate the Menu

Phone Lock Settings

Activate the Automatic Key Lock

1. Select “Locks”.

2. Select "Automatic key lock".

3. Select "On" to activate the automatic key lock, also during an ongoing call.

Deactivate the Automatic Key Lock

1. Select “Locks”.

2. Select “Automatic key lock”.

3. Select “Off” for deactivation of automatic key lock.

Activate the Phone Lock

You can protect a handset from unauthorized use. If the Activate phone lock function is activated

you must enter a PIN code at power on, or when the handset is placed in a charger. The phone

lock is activated when the handset is placed in the charger. The default phone lock code (0000)

can be changed to any 4 -8 digit code It is possible too change the time for activation of this

lock (default 20 seconds), see “Automatic lock time” on page 70..

1. Select “Locks.

2. Select "Phone Lock".

3. Select “Auto phone lock”.

4. Select “On”, or "On in charger".

5. Enter a PIN code.

6. Press "OK".

If the PIN code is forgotten it can be removed by your distributor.

Note: You can answer/end an incoming call and/or press the alarm button while the

keypad is locked. Any one of five predefined emergency numbers can also be called

while the keypad is locked, If configured in WinPDM/Device Manager. See the Mitel

5624 Wireless Handset Configuration Guide.

Tip: It is possible to change the time for activation of this lock (default 20 seconds). It is

also possible to choose whether the handset will not be unlocked automatically at

incoming calls and messages (default), to avoid unintentional key presses, see Activate

the Automatic Key Lock on page 69 and Deactivate the Phone Lock on page 70.

Note: Any one of up to five emergency numbers can be called while the handset is

locked, if configured in the WinPDM/Device Manager. See the Mitel 5624 Wireless

Handset Configuration Guide.