User guide

Mitel Wireless 5624 Handset User Guide
18
Making and Answering Calls
Call List
1. Press "Menu",
2. Select "Calls" .
3. Select "Call list".
4. Select a number.
5. Press or the "Call" soft key to dial. The number can be edited before the call is dialed.
Press "More" and select "Edit number". The 25 last received, dialed, or missed calls are
stored in a call list. See the Mitel 5624 Wireless Handset Configuration Guide.
Make a Call
Pre-Dial
Enter the number on the handset and press to get the line. The number is shown on the
display while dialing. If required, you can press the "Clear" soft key to erase the number. You
can use the navigation key to step and add/delete a digit in the middle of a number.
An international number can be dialed from the handset by entering a + character followed by
the country code and local number. To enter the + character, long press the 0 key until the
character is shown in the display.
You can turn on the tone sender in a pre-dialed number with a long press on the *-key.
Dial Using a Pre-programmed Hot Key, Soft Key or Multifunction Button
The Multifunction button, hot keys, and soft keys can be programmed with a handset number.
Press the pre-programmed hot key, soft key or Multifunction button to dial the number. The call
will automatically be connected.
Dial a Number from the Call List
1. Press .
2. Select a number and press or the "Call" soft key to dial.
The number can be edited before the call starts.
Note: The + character cannot be entered and international numbers cannot de dialed
this way, if the 0 key has been configured as a hot key, see Define Hot Keys on page 58.
Note: The Multifunction button does not apply to the 5624 Personal Alarm license.