User guide

Customizing Your Phone

Unlock Keypad

1. Press

2. Press "Yes".

Lock/Unlock the Handset

The handset can be protected from unauthorized use. If this function is activated, a PIN code

has to be entered at power on, or when the handset is placed in a charger – this behavior will

first be activated when the handset is placed in the charger. The default phone lock code (0000)

can be changed to any 4–8 digit personalized code.

1. Enter the “Settings” menu. See the Mitel 5624 Wireless Handset Configuration Guide.

2. Select “Locks”

3. Select “Phone lock”.

4. Select "Auto phone lock"

5. Select "On", "On in charger", or "Off".

6. Enter your PIN code.

7. Press "OK".

Using the Loudspeaking Function

There are several options to activate the loudspeaking function:

• Press a Navigation key, Hot key or Soft key defined as short cut to a Phone call

function. When pressing the key, a predefined number is called, see “Short cuts Menu” on

page 57.

• When receiving a call, press the soft key

• During a call, press the soft key

This function can also be activated by selecting another answering method, that is,

"Automatically" and/or "Loudspeaking" See “Answer a Call” on page 20.

Note: You can press the volume buttons and the mute button during the call. If the 5624

Personal Alarm license is used it is also possible to press the alarm button.

Note: Press “OK”. If a handset is shared and one of the users logs off the shared/hot

desk phone, the lock that prevents the handset from unauthorized use is deactivated.

For additional information, see Log a Shared/Hot Desk Phone On/Off on page 15.

Note: If the handset is configured in WinPDM you can call a pre-defined emergency

number while the handset is locked. See the Mitel 5624 Wireless Handset Configuration

Guide.