User guide

Mitel 5607 Wireless Handset User Guide
72
Battery low, charge now The battery level is low. Charge or replace the battery.
Phonebook is not
available at the moment.
The phonebook does not respond, not
available at the moment.
Try again later. If the fault persists
do a factory reset via the Admin
menu or PDM.
Voice mail number not
defined
There is no Voice mail number
defined in the handset.
Define a Voice mail number via the
PDM.
Could not encrypt
connection.
The parameter "Encryption Required"
is enabled in the handset in
combination with;
1. Un-encrypted base station(s);
and/or,
2. Unsupported base station(s).
1. Disable the "Encryption
Required" parameter in
handset; and/or,
2. Enable the encryption in the
base station(s); and/or,
Note: If a base station(s) is
used, the software version
must be 3.1.x or later.
3. Use supported base station(s).
Ask your supplier.
Not allowed 1) The handset that has shared phone
functionality enabled cannot be
logged in because another
handset/user is using the extension.
Note: If you require a password (AC
code) to log in a handset and the
handset is logged in, you can log in a
second handset. The first logged in
handset will automatically be logged
out.
2) The extension (user) does not
exist.
3) The password is incorrect.
1) Log out the handset that uses
the extension.
2) Make sure that you entered the
correct extension. if required,
contact the system administrator.
3) Make sure you have entered the
correct password. Contact the
system administrator if you have
forgot the password.
Display shows Probable cause Action or comment