User guide

Mitel 5607 Wireless Handset User Guide
46
Because Bluetooth supports the Bluetooth 2.0 standard, other headsets may also work but
they have not yet been verified.
Enable a Bluetooth Connection
1. Select "Bluetooth".
2. Select "Enable".
3. Press "Select".
Pair/Connect the Bluetooth Headset
In order to use a Bluetooth headset it must first be paired with a handset. You need to pair the
Bluetooth headset only once. A paired Bluetooth headset will automatically be connected as
indicated by the icon in front of the headset.
1. Place the Bluetooth headset and the handset next to each other.
2. Enable Bluetooth. See the Mitel 5607 Wireless Handset Configuration Guide.
3. Put the Bluetooth headset in pairing mode. See the Bluetooth headset user manual.
4. Select "Bluetooth".
5. Select "Headset".
6. Select "Add new".
7. Press "OK".
The handset will now search for a Bluetooth headset.
8. When the headset is found, press "Pair".
9. If required, enter a PIN code.
See the user manual for the Bluetooth headset.
10. Press "OK".
A message confirming the pairing process was successful appears. The connection is also
confirmed by a blue icon that appears on the Bluetooth headset.
Add another Bluetooth Headset
Up to eight Bluetooth headsets can be paired to a handset, but only one at a time can be
selected. To pair another headset, repeat steps 1 to 6 in the Mitel 5607 Wireless Handset
Configuration Guide. The paired headsets are displayed in the handset “Headset” menu.
A.5.4 Select (Activate) a Bluetooth Headset
1. Select "Bluetooth".
2. Select "Headset".
3. Select a headset by pressing and on the navigation key.
Note: Your Bluetooth headset may have greater or fewer functions than described here.
Refer to the Bluetooth headset manual.