User guide

Mitel 5607 Wireless Handset User Guide
18
Answer a Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, notifies you of calls.
The ring signal and vibrator can be disabled. The calling party’s handset number or name is
shown. The name will be shown if the calling party’s handset number is stored in the local
phonebook. When a headset is connected to the handset, the answering button on the headset
can be used to answer the call.
Other answering methods can be specified in the Settings menu. See the Mitel 5607 Wireless
Handset Configuration Guide. The answering methods are Automatically and Loudspeaking.
When “Automatically” is enabled, all incoming calls are connected automatically.
Answer a Call: 5607 Handset
When the signal sounds press to answer the call, or press the soft key to answer the
call in loudspeaking mode. The name/number of the calling party appears if calling line
information is available.
Answer a Call: Bluetooth
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an
incoming call. To answer the call in the Bluetooth headset, press the button on the headset. To
answer the call in the handset, press on the handset.
End a Call
Press to end the call. For Bluetooth, you can press this button on the headset or handset.
The duration of the call is shown in the display. The total time of the call can also be retrieved
from the Calls menu > Call time.
During a Call
If the handset is configured in the PDM/WSM you can call a pre-defined emergency number
while the handset/keypad is locked. During the ongoing emergency call, the "More" soft key
and the soft key "R" are disabled.
Adjust the Volume during a Call
Press the "Volume up" button to increase the volume, and the "Volume down" button to decrease
the volume. The handset will now store and keep the new volume level. It is also possible to
use the navigation keys and to adjust the volume.
Note: Some of these functions are system dependent. The options are set up in the
Portable Device Manager (PDM). See the Mitel 5607 Wireless Handset Configuration
Guide, and the Mitel Portable Device Manager (PDM) Installation and Maintenance
Guide.