User guide

5606 Wireless Handset User Guide
12
4. Enter the feature access code for Conference Call.
5. Press the R key again to start the conferenced call.
Device-based
Conference is not supported in device-based mode.
Call Park
System-based
The Call Park feature allows you to place a call in a special hold state.You can then retrieve
the call from any extension in the system.
To park an active call:
1. Press the R soft key to place the call on hold.
2. Dial the feature access code for Call Park immediately followed by the directory number
on which to park the call and then press the ON button.
3. Inform the called party of the waiting call.
To retrieve a parked call:
1. Press the ON button to go off hook.
2. Dial the feature access code for Call Park - Retrieve immediately followed by the directory
number on which the call is parked, and then press the ON button.
Device-based
Call Park is not supported in device-based mode.
Call Forward
To set Call Forwarding:
1. Press the ON button to go off hook.
2. Dial the feature access code for the Call Forwarding mode you want to use, followed
immediately by the extension number to which you want to forward. (For example, if *62*
is your FAC for Call Fwd - Busy, and you want to forward calls to extension 1234, then
press *62*1234.)
3. Press the ON button.
To cancel Call Forwarding:
1. Dial the feature access code for Call Forwarding - Cancel and then press ON.
2. When you hear a dial tone, press OFF to hang up. Forwarding is cancelled.