Specifications

MCD System Functionality

MXe III Controller

The MXe III Controller is available in two capacities: standard and expanded. Both versions

include an embedded Analog Main Board and redundant cooling fans.

The MXe III Controller supports up to

• 350 devices (combined IP/ONS) in the standard configuration

• 400 IP devices and 1500 ONS devices (1500 combined IP/ONS) in the expanded

configuration

• 1400 SIP devices/users

The MXe III Controller can host up to seven bays (North America only) providing connectivity

for 96 ONS or OPS devices per bay. Only BCCIII-equipped bays are supported. Trunk cards

are not supported.

The MXe III Controller provides

• Two 10/100/1000 BaseT Ethernet LAN ports (RJ-45 connector)

• One 10/100 BaseT Ethernet WAN port (RJ-45 connector)

• Four externally accessible slots and two internal slots for optional modules

• Four CIM ports

• An Analog Main Board that provides 6 analog trunks and 4 analog extension ports

• An alarm relay port

• SATA solid state drive or hard drive for software storage

Optionally, you can install

• MXe II Expanded Processor Package to upgrade from standard capacity (350 devices

devices and 64 E2T channels) to expanded capacity (1500 devices and 128 or 192 E2T

channels)

• Two Quad DSP modules for G.729a compression

• Two octal DSP II modules for G.729a compression and T.38 FAX support

• Up to four Dual FIMs for connecting NSUs, peripheral units, and bays

• Up to four Dual T1/E1 modules

• Up to three T1/E1 Combo modules

• Up to three Quad BRI modules

• Power and disk drive redundancy with the addition of a RAID (Redundant Array of Inde-

pendent Disks) controller, a second hard disk, and a second AC PSU