Specifications

Features
123
Redial -Saved
Number
Allows you to save a number for future dialing. The number remains
saved until a replacement number is saved
Yes
Release Allows you to release from an attempted connection to an external
party without going on-hook. Release is useful when you encounter a
busy or unavailable external party that you are attempting to add to a
conference.
Yes
Reminder Allows you to program your set to ring and provide a message at a
specified time within a 24-hour period
No
Remote Wake-up
Calls
Wake-up calls can be set or cancelled remotely from a phone or
attendant console using the Hotel/Motel Room Remote Wake-up Call
feature access codes.
No
Reroute after Call
Forward Follow Me
to Busy Destination
This feature uses the class of service option Call Reroute after CFFM
to busy destination. With this option set to YES, if the user programs
call forward always and the call forward third party or group call
forward destination is busy, the call follows the original called set’s
programmed call reroute first alternative for busy. For example, a call
arrives at station A that is call forwarded under one of the above
stated conditions to station B. If station B is busy or does not answer,
the call follows station A's First Alternative Rerouting. With the COS
option set to NO, the call only follows set A's rerouting on a no answer
condition. This functionality applies only to calls using call forward
always; call forward third party or group call forward with the
"forwarded to" destination being an internal party, another user
across MSDN or calls forwarded externally via ISDN.
No
Resiliency
(3300 ICP only)
Allows the IP Phones to re-home to a secondary controller if a 3300
ICP fails or is taken out of service. This ensures that there is no
disruption in service. In addition, calls that are in progress when an
outage occurs remain in progress and are not lost. Network
administrators may configure IP Phone and IP Console resiliency
from the System Administration Tool of the local element, or through
OPS Manager.
Yes
Ringer Control Allows you to adjust the volume and pitch of the phone ringer Yes
Ring Groups Provides the ability to ring all members of a group simultaneously or
sequentially
Yes
Ring Groups
-Personal
Provides the ability for a user to configure a collection of up to 8
answer points as a personal ring group. An incoming call to the Prime
Number will simultaneously ring all devices in the group."One busy/All
busy" may be configured for the group so that if one answer point is
busy, they will all appear busy. Users also have the ability to "push" a
call back to the ring group so that it may be "puled" (answered) by
another device. "Push and pull" can be made quite simple for the user
by pre-configuring a feature key for this purpose.
N/A
Ringing
-Discriminating
Allows you to distinguish between incoming internal calls, incoming
trunk calls, tie line calls, and Callbacks by using different ringing
patterns (cadences)
Yes
Feature Name: Description:
Support while
the set is on the
secondary
controller
Page 23 of 28