Specifications

General Information Guide
122
Priority Queuing Handles calls in order of priority. When waiting for calls to be
completed internal or external callers are placed in a queue and
assigned an access priority.
N/A
Privacy Release Call privacy between users who share line appearances in key
systems groups is automatic. The privacy release feature allows
users to release privacy during a call to include another member of
the key system group in the call.
Yes
Private Line
Automatic Ringdown
Provides rapid connections between devices, primarily 5560 IPTs
used by securities and commodities traders
Yes
Programmable Key
Modules
Provide phones with additional personal keys Yes
Property
Management
System (PMS)
A PBX feature that allows the hospitality industry to connect their
Hotel PMS systems to the PBX via an IP interface or serial interface.
This connection allows the PMS to notify the PBX when a user checks
in or checks out.
Yes
Q.SIG A protocol that allows you to connect a minimum of two systems
together to form a virtual private network. Q.SIG is supported by the
T1/E1 Modules for both incoming and outgoing calls.
Note: Resiliency does not work over QSIG (NSIs not passed)
N/A
Recorded
Announcement
Device Support
RADs are supported in the system as recording hunt groups. These
special hunt groups support features and restrictions that allow
efficient use of the recording resources. Recording hunt groups are
used in ACD, UCD, Hotel/Motel Wakeup, Automatic Attendant
Overflow and Automated Attendant.
N/A
Range Program
Trunks
Allows installers to select a consecutive range of trunk circuits. The
system automatically assigns sequential trunk numbers to those
circuits. Also copies parameters from the first programmed trunk
including Class of Service, Day, Night1, Night2 and Circuit Descriptor
Number. Trunk Name and Comments are left blank.
N/A
Recall Allows an incoming caller, who has been transferred to an idle station
and not answered within a specified time-out period, call back the last
party who handled the call. Similar time-out recalls occur for parties
who are transferred to busy stations or placed on hold.
Yes
Recall Button See Ground Button. N/A
Record-A-Call Record-a-Call allows extension users to record a two-party call when
one party is connected to a trunk. The recorded conversation is stored
in the users' voice mail mailbox. You can configure this feature to
automatically record incoming calls when the call is answered at the
extension, record external outgoing calls that are made from a system
extension to the PSTN, and record both incoming calls and external
outgoing calls for the same extension.
Yes
Redial Automatically dials the last manually dialed number Yes
Feature Name: Description:
Support while
the set is on the
secondary
controller
Page 22 of 28