User guide

Customizing Your Phone
15
You are logged in and will you will see your extension number in the idle display.
Log off a Handset
1. Press and hold .
2. When the "Logout?" window appears, press "Yes".
If the "Logout in Charger" option is selected, either on the handset or via PDM, the user is
logged out when the handset is placed in the charger.
A user is also logged out from the handset when logging on using a different device but the
same user account.
.Turn On/Off the Audible Signal
A long press on the or in idle mode toggles the ring signal on/off.
The icon indicates a silenced handset.
Lock/Unlock the Keypad
Lock/Unlock the Keypad in Idle Mode
You can lock keys to prevent you from accidentally pressing them.
Lock the Keypad
1. Press .
2. Press "Lock".
Unlock keypad
1. Press
2. Press "Yes".
Lock/Unlock the Keypad during a Call
To prevent accidentally pressing keys you can lock keys during a call. This is useful when
wearing a a headset and a handset attached to a pocket or belt.
Note: If the IP-DECT system supports Hot Desking and the feature is enabled in the
handset via PDM/Device Manager, the handset’s call list will also be downloaded to the
handset. Calls made by the same person with other devices over the same IP-DECT
system will be listed.
Note: You can answer/close an incoming call and/or press the alarm button while the
keypad is locked. If configured in the PDM/WSM, you can call a pre-defined emergency
number while the keypad is locked. See the Mitel 5604 Wireless Handset Configuration
Guide.