User guide

Mitel 5560 IPT User Guide
Group Listen
With Group Listen, you can carry on a conversation using the handset or headset while allowing
others nearby to listen to the person at the far end over the handsfree speaker. The handsfree
microphone is disabled in Group Listen mode.
To activate Group Listen while in a handset conversation:
• Press the key you have programmed as Group Listen. Audio from the far-end party is now
heard through both the handset/headset and the speaker.
To make the call a normal two-way speaker call:
• Press Speaker, then either press and immediately release Microphone to turn the
microphone on continuously; or press and hold Microphone to use the push-to-talk
Microphone feature.
To exit Group Listen mode (and return to a normal handset/headset call):
• Press Group Listen.
To activate or deactivate Group Listen while in headset mode:
• Press Group Listen.
Group Paging / Meet Me Answer
Group Paging allows you to page a group of telephony devices through their built-in speakers.
You can belong to as many as three paging groups with one group designated as your "prime"
group.
When you need to respond to a Group Page but you don't know the identity or extension number
of the paging party, use the Meet Me Answer feature. You have up to 15 minutes after receiving
the page to use Meet Me Answer.
To make a Group Page:
1. Do one of the following:
• Press the key you have programmed as Direct Page.
• Dial the appropriate feature access code.
2. Do one of the following:
• To page your prime page group, press #.
• To page a specific page group, dial the page group directory number.
3. Speak to the dialed party after the tone.
To respond to a Group Page by using Meet Me Answer:
1. Do one of the following:
• Press the key you have programmed as Meet Me Answer.
• Press Left or Right to select the handset or headset you wish to use and then dial the
appropriate feature access code.
2. Do one of the following:
31