User guide

Mitel 5560 IPT User Guide
To type Number information when the onscreen keyboard appears:
Do one of the following:
• Press the key beside the digit you want to enter
• When you have finished selecting digits, press Save.
Specify Display Brightness and Contrast
You can adjust the brightness and display contrast either via the 5560 IPT volume controls (when
the terminal is idle) or via the Settings application.
To adjust the display contrast using the volume controls:
1. Press Left or Right to select the display to which you wish the changes to apply.
2. Repeatedly press Vol + or Vol -.
3. Perform the same steps for the other display, as needed.
Note: You can use this method only when the 5560 IPT is idle. If the terminal is ringing, this
action adjusts the ring volume. If the terminal is in use, this action adjusts the handset, headset
and speakerphone volume.
To adjust the display brightness and contrast using the Settings application:
1. Press the Left or Right key and then press the Menu fixed function key.
2. Press Settings.
3. Press Brightness and Contrast.
4. Press the Brightness and Contrast keys to adjust the brightness and contrast of your
screen.
5. Press Save.
6. Perform the same steps for the other display, as needed.
Note: Press Cancel at any time to exit this application without making any changes.
Specify Audio Feedback Options
The error beep volume in the 5560 IPT is related to the volume of the speaker. You can set the
beep volume using this procedure; however, adjusting the speaker volume also affects the beep
volume.
To adjust the volume of the audio feedback:
1. Press the Left or Right key and then press the Menu fixed function key.
2. Press Settings.
3. Press Audio Feedback.
12