Specifications

Phones and Voice Applications
65
Accuracy can be achieved using a Stratum 3 clock source (± 4.6 ppm), which is standard on
all 3300 controllers.
DECT RFP units with IP connection use their own internal reference clocks. Because local
synchronization takes place between these units directly, the requirements on the ICP are not
as critical.
Refer to “RFC 3942, reclassifying DHCP options: DeTeWe and Spectralink Phones” on
page 239 for information regarding DECT phones and DHCP.
SpectraLink Phones
For information on SpectraLink phones see “Wireless Phone Performance on the 3300 ICP”
on page 258.
Refer to “RFC 3942, reclassifying DHCP options: DeTeWe and Spectralink Phones” on
page 239 for information regarding SpectraLink phones and DHCP.
Phone Stands
The Gigabit Ethernet phone stand and the Wireless LAN (WLAN) phone stand can be installed
in place of the regular phone stand on 5200/5300 series IP phones.
MCD Release 4.1 coincided with the introduction of the IP DECT phone stand.
The Wireless LAN phone stand operates with any version of 3300 ICP system software. The
Gigabit Ethernet phone stand operates with 3300 ICPs running system software version 6.1
UR1 and greater.
Table 25 indicates which phones support the Gigabit Ethernet and Wireless LAN Stands.
Table 25: Phone Stand Support
Phone
Gigabit Ethernet
Stand Support
WLAN Stand
Support
IP DECT Stand
Support
5001 No No No
5005 No No No
5010 No No No
5020 No No No
5201 No No No
5205 No No No
5207 No No No
Page 1 of 2