Specifications

Engineering Guidelines
328
The remote device can also be interrogated to determine the settings it is using. This is useful
as a cross check that LLDP/LLDP-MED is working, or to diagnose configuration conflicts:
To determine which LLDP-MED options are operational on a particular port, the following
command can be used:
63 No-override | No-override
64 DSCP | 011010 4
100 DSCP | 3
HP ProCurve Switch 5304XL(config)# show lldp info remote-device b2
LLDP Remote Device Information Detail
Local Port : B2
ChassisType : network-address
ChassisId : ddde
PortType : mac-address
PortId : 08 00 0f 12 2a 7a
SysName : regDN 63022,MITEL 5220 DM
System Descr : regDN 63022,MITEL 5220 DM,LIM,h/w rev 0,ASIC rev 0,f/w Bo...
PortDescr : LAN port
System Capabilities Supported : bridge, telephone
System Capabilities Enabled : bridge, telephone
Remote Management Address
Type : ipv4
Address : 100.100.100.101
MED Information Detail
EndpointClass :Class3
Media Policy Vlan id :100
Media Policy Priority :6
Media Policy Dscp :46
Media Policy Tagged :True
Poe Device Type :PD
Power Requested :51
Power Source :Unknown
Power Priority :High
HP ProCurve Switch 5304XL(config)# sh lldp config b2
LLDP Port Configuration Detail
Port : B2
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False