Specifications

Engineering Guidelines
124
Application Processor Card
The Application Processor Card (APC) is an embedded PC card. The APC can only be installed
in CX(i) and CX(i) II controllers that meet the minimum hardware requirements as shown in the
following table.
The APC can only be installed in CX(i) and CX(i) II controllers that meet the minimum hardware
requirements as shown in the following table.
The Application Processor Card is a hardware component. To allow for an overall solution, the
APC ships with a software media kit. The software media kit is a separately orderable part.
For information about installing the APC hardware, software and applications, refer to the 3300
ICP Technician’s Handbook and the documentation for the application. Refer to the table below
for valid part numbers.
Table 41: Embedded Music On Hold Capabilities
Platform Total RAM Total Play Time
Maximum Number of
Embedded MOH
Sources
MXe Server
LX with 512 MB (1400-user), MXe expanded
16 MB 32 minutes 64
MXe base 16 MB 32 minutes 16
MX, LX with 256 MB 8 MB 16 minutes 16
CX/CXi 4 MB 8 minutes 5
AX 2 MB 4 minutes 2
Mitel Part Number Description
50005096 CX
50005097 CXi
50006093 CX II
50006094 CXi II
Note: CX and CXi controllers with part numbers other than those shown in the table
above will not support the APC.
Mitel Part Number Description
51010725 Application Processor Card - CX(i)
50005413 Application Processor Card - CX(i) SW Media Kit
50006095 Application Processor Card - CX(i) II