Specifications

Power
107
5360 + Conference Unit 128 12.8
5360 + Cordless OM/Handset + Headset 120 12.0
5360 + Bluetooth module 120 12.0
5360 + LIM 99 9.9
5505 39 3.9
Navigator 86 8.6
TeleMatrix 3000IP 37 3.7
Gigabit Ethernet Phone Stand Version 1 (Note 2) 53 + Phone 5.3 + Phone
Gigabit Ethernet Phone Stand Version 2 (Note 2) 34 + Phone 3.4 + Phone
5540 53 5.3
5560 IPT 129 12.9
UC360 200 20
Note 1: If a phone does not support LLDP-MED advertisements but does support 802.3af advertisements, then
802.3af will be used.
Note 2: The Gigabit Ethernet Stand does not send LLDP-MED power advertisements. However, the phone that
is used with the Stand will detect its presence and transmit an LLDP-MED power advertisement that includes
both the phone power and 5.3 watts for the stand power.
Additional Notes:
• The 5215DM / 5212 do not support any adjuncts.
• The 5220DM / 5224 will report that a PKM48 is installed when either a PKM48 or a PKM12 is installed.
• The 5220DM / 5224 do not know if a Conference Unit is connected until the Conference Unit side panel is
powered on.
• The 5235 and the 53x0 series of phones offer PoE power only. There is no option for using a 24V power
adapter with these phones.
• The 5310 Conference Unit side panel does not work with the 5235 and the 53x0 series of phone. These
phones must use the new Conference Unit Module. Unlike the side panel unit used with the 5220DM / 5224,
the 5235 and the 53x0 series of phones will know if the Conference Unit Module is plugged in.
• The 5235 will report that a PKM48 is in use when either a PKM12 or a PKM48 is connected.
• The 5330 and the 5340 do not support the PKM12 or the PKM48.
Note 3: See “Power Restrictions” on page 67. for information about power restrictions related to the Gigabit
Ethernet Phone Stand.
Note 4: If a phone does not support LLDP advertisements but does not support 802.3af advertisements, then
802.3af will be used.
Table 37: LLDP-MED Power Advertisements (continued)
Device
Power Value
Advertised
Power
Consumption
(Watts)
Page 4 of 4