Specifications

Power

101

IEEE 802.3af Power Over Ethernet standard (PoE)

Table 36 can be used to determine which 802.3af power class advertisement a phone will

transmit to the controller or L2 switch.

5330 with 1 PKM 7.5 W

5330 with 2 PKMs 9.2 W

5330e 6.1 W

5340 6.1 W

5340e 6.1 W

5340 with 1 PKM 7.5 W

5340 with 2 PKMs 9.2 W

5360 9.5 W

5505 6.1 W

5540 6.1 W

5560 IPT 6.1 W

Navigator 6.1 W

TeleMatrix 3000 IP 5.0 W

UC360 5.0 W

Note 1: The Gigabit Ethernet phone stand does not transmit CDP power advertisements, however, the stand

allows the phone’s CDP power advertisements to be passed through to the network.

Note 2: See “Power Restrictions” on page 67. for information about power restrictions related to the Gigabit

Ethernet Phone Stand.

Note 3: These advertised values assume that a 3300 Power Dongle is used with the phones, and the power

requirements shown in the table include the power required by both the phone and the 3300 Power Dongle.

Note: The CXi controller uses 802.3af power call advertisements to determine phone

power requirements, however the CXi II actually measures the power required by the

phones.

Table 36: 802.3af Power Class Advertisements

Device Class Advertised

5001 IP Phone 0

5005 IP Phone 0

5010 IP Phone 0

Page 1 of 4

Table 35: CDP Power Advertisements (continued)

Device

CDP Power