User guide

5312/5324 IP Phones User Guide
USING THE LINE INTERFACE MODULE (5324 IP PHONE ONLY)
5324 IP Phones support the Mitel Line Interface Module. The Line Interface Module allows you to
make and receive calls over an analog line (referred to as the Line Interface Module line) connected
to your phone, and operates in either of the following two modes (as determined by your System
Administrator):
• Line Interface Module mode: your phone allows you to use the Line Interface Module line at any
time.
• Failover Mode: you can use the Line Interface Module line only when the IP connection has
failed.
Note: Handsfree and on-hook dialing are not supported on the Line Interface Module line.
LINE INTERFACE MODULE MODE
Make a Call
To make a call using the Line Interface Module line:
1. Lift the handset.
2. Press the Line Interface Module key. ANALOG CALL appears on the display.
3. Dial the number to make the call.
Notes:
• When making external calls over the Line Interface Module line, a prefix (e.g. 9) is not
required.
• If your phone's Line Interface Module key has the Privacy option enabled and another phone
is on a call using the Line Interface Module line (that is, the Line Interface Module key is solid
orange), you cannot access the Line Interface Module line. The user of the other phone must
first hang up before you can access the Line Interface Module line.
• To determine whether the Privacy option is enabled, contact your System Administrator.
Answer a Call
To answer a call using the Line Interface Module line:
1. Lift the handset.
2. Press the flashing Line Interface Module key. ANALOG CALL appears on the display.
Answer a Waiting Call on the Line Interface Module Line
If you have subscribed to an analog call waiting service, you may use the hookswitch or press
(CANCEL) to answer a waiting Line Interface Module call. When you are on a Line Interface Module
call and a waiting Line Interface Module call arrives, you will hear a beep.
Note: This feature may not be supported in all regions.
41