User guide
Table Of Contents
- 11BRing/Message indicators
- 12BSelecting Menu Options
- 13BAbout Feature Access Codes
- 14BLine Interface Module
- 15BDon't cradle the handset!
- 16BProtect your hearing
- 17BAdjust the viewing angle
- 18BRinger Control
- 19BHandset Receiver Volume Control
- 20BSpeaker Volume Control
- 21BDisplay Contrast Control
- 22BFeature Keys
- 23BLanguage Change
- 24BMake a Call - PBX
- 25BMake an External Call - KTS
- 26BMake an Intercom Call - KTS
- 27BAnswer a call
- 28BRedial
- 29BSpeed Call Keys
- 30BSpeed Call – Personal
- 31BHandsfree Operation
- 32BAuto–Answer
- 33BGroup Listen
- 34BHold
- 35BHold and Page
- 36BMute
- 37BHandset Mute (does not work?)
- 38BTransfer
- 39BConference
- 40BConference Split (5324 IP Phone only)
- 41BAdd Held (5324 IP Phone only)
- 42BSwap
- 43BCall Forward
- 44BCall Forward - Remote (I am Here)
- 45BCall Forward - Forced
- 46BCall Forward - Toggle
- 47BMessaging - Advisory
- 48BMessaging - Callback
- 49BAccount Codes
- 50BCallback
- 51BCall Park
- 52BCall Park - System
- 53BCall Park - Specific Orbit
- 54BCall Park - Destination Phone
- 55BCall Pickup
- 56BCampon
- 57BDo Not Disturb
- 58BOverride
- 59BPaging - PA
- 60BPaging - Direct
- 61BHandsfree Answerback to a Direct Page
- 62BPaging - All Sets
- 63BPaging - Group
- 64BDirect Station Select/Busy Lamp Field (DSS/BLF)
- 65BDirect Station Select (DSS)/Busy Lamp Field (BLF)/Call Pickup
- 66BDirect Page/Busy Lamp Field (DP/BLF)
- 67BDirect Station Select (DSS)/Busy Lamp Field (BLF)/Direct Page/Call Pickup
- 68BHeadset Operation
- 69BMusic
- 70BPark and Page
- 71BRecord a Call
- 72BAuto-Latch Microphone
- 73BReminder
- 74BReminder - Multiple
- 75BCall Logging (5324 IP Phone only)
- 76BPhonebook
- 77BCall Monitoring
- 78BDoor Opener
- 79BNight Answer
- 80BDate and Time Setup
- 81BRelease
- 82B
- Secure Hot Swap
- 83BMobile Extension
- 84BTurn the conference unit on and off
- 85BAdjust the conference unit volume
- 86BPlace the conference unit in Presentation mode
- Mute the Conference Unit
- Exit the conference
- 89BTo start a Conference
- 90BAdjust the conference unit volume
- 91BMute the conference unit
- 92BExit the conference
- 93BLINE INTERFACE MODULE MODE
- 94BFAILOVER MODE
- 95BEMERGENCY CALLS
- 96BFEATURE ACCESS CODES
5312/5324 IP Phones User Guide
• To change the time, press the Change softkey, enter the new time, press the Save softkey
and then press the Yes or No softkey depending on whether you want the reminder to repeat
daily.
• To cancel the Reminder, press the Del softkey.
• To exit without canceling the Reminder, press
(MENU).
To acknowledge a Reminder when your phone rings once, do one of the following:
• Lift the handset.
• Press the Confirm softkey (if available).
Call Logging (5324 IP Phone only)
Call Logging keeps track of the names (if available) and telephone numbers of all your incoming calls
or only those you missed.
To program your phone to log your incoming calls:
1. Press
(MENU).
2. Press the No softkey until "Call Logging" appears.
3. Press the Yes softkey.
4. Press the Missed softkey to log missed calls only or the All softkey to log all calls.
5. Press one softkey as follows:
• Press Intl to log calls from other extensions only
• Press Extl to log outside calls only
• Press Both to log internal and external calls.
To turn off call logging:
1. Press
(MENU).
2. Press the No softkey until "Call Logging" appears.
3. Press the Yes softkey.
4. Press the Off softkey.
To display the call log:
Press the Callers feature key.
1. Press the New softkey to display details for newly logged calls only, or the Old softkey to display
details for previously logged calls. The display shows the caller's number. Press the Name or
Num softkey to display the caller's name or number.
2. If more than one call is logged, use the Next and Previous softkeys to display the others.
To return a call in the call log:
1. Display the call you want to return.
2. Do one of the following:
• If the call is internal, press the Call softkey.
• If the call is external, dial 9 and then press the Call softkey.
33