User guide
Table Of Contents
- 11BRing/Message indicators
- 12BSelecting Menu Options
- 13BAbout Feature Access Codes
- 14BLine Interface Module
- 15BDon't cradle the handset!
- 16BProtect your hearing
- 17BAdjust the viewing angle
- 18BRinger Control
- 19BHandset Receiver Volume Control
- 20BSpeaker Volume Control
- 21BDisplay Contrast Control
- 22BFeature Keys
- 23BLanguage Change
- 24BMake a Call - PBX
- 25BMake an External Call - KTS
- 26BMake an Intercom Call - KTS
- 27BAnswer a call
- 28BRedial
- 29BSpeed Call Keys
- 30BSpeed Call – Personal
- 31BHandsfree Operation
- 32BAuto–Answer
- 33BGroup Listen
- 34BHold
- 35BHold and Page
- 36BMute
- 37BHandset Mute (does not work?)
- 38BTransfer
- 39BConference
- 40BConference Split (5324 IP Phone only)
- 41BAdd Held (5324 IP Phone only)
- 42BSwap
- 43BCall Forward
- 44BCall Forward - Remote (I am Here)
- 45BCall Forward - Forced
- 46BCall Forward - Toggle
- 47BMessaging - Advisory
- 48BMessaging - Callback
- 49BAccount Codes
- 50BCallback
- 51BCall Park
- 52BCall Park - System
- 53BCall Park - Specific Orbit
- 54BCall Park - Destination Phone
- 55BCall Pickup
- 56BCampon
- 57BDo Not Disturb
- 58BOverride
- 59BPaging - PA
- 60BPaging - Direct
- 61BHandsfree Answerback to a Direct Page
- 62BPaging - All Sets
- 63BPaging - Group
- 64BDirect Station Select/Busy Lamp Field (DSS/BLF)
- 65BDirect Station Select (DSS)/Busy Lamp Field (BLF)/Call Pickup
- 66BDirect Page/Busy Lamp Field (DP/BLF)
- 67BDirect Station Select (DSS)/Busy Lamp Field (BLF)/Direct Page/Call Pickup
- 68BHeadset Operation
- 69BMusic
- 70BPark and Page
- 71BRecord a Call
- 72BAuto-Latch Microphone
- 73BReminder
- 74BReminder - Multiple
- 75BCall Logging (5324 IP Phone only)
- 76BPhonebook
- 77BCall Monitoring
- 78BDoor Opener
- 79BNight Answer
- 80BDate and Time Setup
- 81BRelease
- 82B
- Secure Hot Swap
- 83BMobile Extension
- 84BTurn the conference unit on and off
- 85BAdjust the conference unit volume
- 86BPlace the conference unit in Presentation mode
- Mute the Conference Unit
- Exit the conference
- 89BTo start a Conference
- 90BAdjust the conference unit volume
- 91BMute the conference unit
- 92BExit the conference
- 93BLINE INTERFACE MODULE MODE
- 94BFAILOVER MODE
- 95BEMERGENCY CALLS
- 96BFEATURE ACCESS CODES
5312/5324 IP Phones User Guide
Park and Page
With Park and Page, you can park a call and initiate a page all in one step. Park and Page options
include
• Park and Page Set: After a call is parked, the system performs an all-set page.
• Park and Page Group: After a call is parked, the system pages your Paging Group.
• Park and Page: After a call is parked, you must enter the extension or Page Group number.
• Park and PA Page: After a call is parked, you must enter a Paging Zone number (0-9).
See "Programming a Feature Key" for information on assigning this feature to a Personal Key.
To park a call and page a call:
1. Answer or make a call.
2. Perform one of the following:
• To page all phones and the PA, press Park & Page Sets
Or
Press
(TRANS/CONF), dial *63 and dial *.
• To page all phones in a group and the PA, press Park & Page Grp
Or
Press
(TRANS/CONF), dial *63 and press #.
• To page an extension number, press Park & Page and dial the extension
Or
Press
(TRANS/CONF), dial *63 and dial the extension.
• To page all phones in a specified group and the PA, press Park & Page and dial the two-digit
Page Group Number
Or
Press
(TRANS/CONF), dial *63 and dial the two-digit Page Group Number, then #.
• To park a call in orbit and perform a PA Page to any or all nine Paging Zones, press Park &
PA Page and dial the Paging Zone number (0 for all zones, 1-9 for a specific zone).
Or
Press
(TRANS/CONF), dial *64 and dial the Paging Zone number (0 for all zones, 1-9
for a specific zone).
Note: To Park and Page a call using speed call keys, press
(TRANS/CONF) to get dial tone.
Then press a speed call key that is programmed with the Park and Page access codes plus the digits
for the required paging option (For example, the digits for the required paging option could be an
extension number to page a single phone or * to page all phones plus PA paging).
28