Specifications

106 Using the phone system
Final
Using a
headset
The Mitel 5212, 5224, 5312, 5324, 5330, and 5340 IP phones support the use
of specially designed headsets made by Plantronics. The following headset
types are available:
• Monaural over-the ear
• Binaural over-the head with voice tube
• Binaural over the head with noise canceling microphone
Some headsets are all supplied with a control switch that can be used to mute
the microphone.
Connect and configure the headset
To connect the headset to the Mitel 5320/5330/5340/5260, 5224/5324 or
5212/5312 IP phone, follow these steps:
1 Plug the headset into the headset jack on the back of the set.
2 Remove the handset from the cradle. You can hook it over the top of the
set cradle.
3 If using a Mitel 5320/5330/5340/5260 or 5224/5324 IP phone, press the
DIR softkey, then the QUIT softkey to take the phone to an on-hook (or
idle) state.
If using a Mitel 5212/5312 IP phone, press the key, then press the
key to take the phone to an onhook (or idle) state.
Answer a Call with the headset
To answer a call while using the headset, press the Line Appearance key or
the ANSWER softkey.
End a Call with the headset
To end a call while using the headset on the Mitel 5224/5324 or 5320/5330/
5340/5260 IP phone, press the END softkey
To end a call while using the headset on the Mitel 5212/5312 IP phone, press
the key.
Mute the headset
To mute the microphone, press and hold the control switch if it has one.