Specifications

Mitel IP Phone Reference Guide
46 Using Phone Features
The n-way call is now activated. The LCD display on all parties’ phone shows “n-
Way Call”, where n is the number of the parties in the conference.

Until CONF is pressed a second time, the first party will remain on hold and
you can talk with the second party privately.

By putting an n-way call on hold, the other parties can continue talking.

You can use the
key instead of CONF. When using this key, you must press twice to activate
an n-way call or you will initiate a transfer instead.

If you have programmed a memory key, you can use it to transfer/conference
calls.

If you want the option to leave the conference and leave the two parties
connected (when both parties are external), you must have the permission
Redirect Inbound Call to External Number enabled.

Once the n-way call is established, you can use the transfer feature to
transfer participants to another party.
Joining Two Calls
The N-way call feature allows you to conference together two calls on your phone's Line
appearances. To activate a N-way call in these circumstances, follow these steps:
1. While on an active call, press CONF.
2. Select the Line Appearance of the person on hold that is to be connected.
3. Press CONF again.
The N-Way call is now activated.
You cannot join two lines if both lines are on conference calls. In other words, the
system does not allow joining two conferences together.
Phone Directory
Using the Directory, you can view the Internal Directory on your phone’s LCD screen
and make calls. Depending on how the administrator has configured the system, you will
have one of two types of directory searches: Classic or Predictive.
Classic
You can access the directory with the phone on-hook or off-hook. To view the directory,
follow these steps:.