Specifications

Mitel IP Phone Reference Guide
42 Using Phone Features
The system prompts you to enter an extension.
2. Enter your extension.
The system prompts you to enter your PIN.
3. Enter your PIN.
4. Press # or ENTER once you have finished entering your PIN.
The system verifies that the PIN is valid and then logs you into the phone.

You cannot log in or out, or activate a phone, while the phone is on an active
call.

If you are not logged into a phone, all calls to your extension go directly to call
coverage.

If you have not been assigned the privileges required to log out of your phone
you are not prompted for a PIN when you log in.

You are not prompted for a PIN when you log into a phone with a location
extension.
Logout
This feature only applies to phones with softkeys.
To log out from a phone, follow these steps when your phone has no calls connected:
1. Press MENU.
2. Press LOGOUT.
The phone displays a confirmation message.
3. Press YES to proceed.
The phone displays the message "Logout successful", confirming that you are
logged out of the phone and the system. Incoming calls will be forwarded to Call
Coverage. The phone returns to a logged out/unassigned idle state.

If your phone has been locked you cannot log out of the phone. The
LOGOUT softkey is not be displayed on your phone. Contact your system
administrator for assistance.

You cannot log in or out, or activate a phone, while the phone is on an active
call.

You can use