Specifications

Mitel IP Phone Reference Guide
30 Using Phones
•a silhouette desk phone to ensure you can log into the extension you
have assigned to the cordless, which ensures that the extension and
PIN are valid within silhouette .
• When rebooting the silhouette cordless handsets you need to briefly lift the
handset(s) from their cradles and place them back on the cradles. On their
display you should see Searching for Gateway.
• If a phone is freezing or giving you problems try removing the battery for a
few seconds, replacing it, and then rebooting the gateway to default settings
and begin again.
• If you’ve accidently put in an IPEI in an incorrect spot and want to change it:
• Change it to the correct IPEI
• If there is no handset attached to that handset replace the IPEI field
with zeroes
Notes
• The Gateway only supports three simultaneous calls. Any further attempt to
establish a call results in the handset receiving a busy tone.
• Press and Hold Reset on the Gateway for more than 30 seconds to reset its
default values.
• Press and Hold Reset on the Gateway for five seconds to restore to a non-
default values.
• To register multiple handsets, manually enter the IPEIs into the Telephony
settings page via the web interface.
• Every time a new handset is added, the Gateway needs to be rebooted.
• A new handset cannot be registered if another handset is already on a call
because the Gateway cannot be rebooted.
• If a prefix digit is required to dial internal or external calls that have been
logged, you cannot dial directly from the call log. This is a common problem
with call log capabilities.