Specifications

Mitel IP Phone Reference Guide
18 Using Phones
After installing a DECT repeater, test the signal range to ensure that the repeater has
registered with the stand. Test the handset signal range by going to the limit of signal
range. If the repeater has registered with the stand, the handset signal range should be
approximately 50 meters (indoors) or 300 meters (outdoors) from the repeater.
Repeaters can be used to extend the signal in all directions but cannot be used in a
series with one another.
Information on how to install and configure a repeater is beyond the scope of this
topic.
5610 Cordless Features
• Call and Telephoney Features
• 8 handsets can be homed to one base
• Maximum of 3 simultaneous calls, per base station
• Call forward all, on busy, on no answer
• Call timer
• Call transfer and call hold
• Caller ID with name from phone book
• Distinctive ringing
• Call log of incoming/outgoing/missed calls
• Call return (from call log for internal calls only)
If a prefix digit is required to dial internal or external calls that have been
logged, then you cannot dial directly from the call log. This is a common
problem with call log capabilities.