Specifications

Mitel IP Phone Reference Guide
Personalizing Phone Usage through the Web 99
The system creates a dynamic site based on the current location of your PC. If you
already have a site associated with a different location, it will be released before any
new site is created.
Release a Dynamic Site
To release a dynamic site, follow these steps:
1. Click My Dynamic Site in the left menu.
2. Click Release Dynamic Site.
The system release your dynamic site regardless of the site from which you are
currently connected. It will also log you out from your phone.
View Dynamic Site Information
To view your current dynamic site information, click My Dynamic Site in the left menu.
At the bottom of the page, you can see a line that specifies the address you are currently
connected from, which indicates the IP address of the computer you are currently logged
into. This could be at your dynamic site or at a regular static site of your company.
At the bottom of the page, you will also see a line which specifies the dynamic site IP
address. This will display the address of your dynamic site (the address of the router to
which your PC is connected) or blank if you do not currently have a dynamic site.
Connect your Phone to a Dynamic Site
Follow the normal steps to connect your phone on the network defined as your dynamic
site.
If you connect your phone to a network that is not the one defined for your dynamic site,
your phone will display "Not a Valid Site".
Once your phone is connected, follow the normal steps to log in.
Contacts
The phone system has the following three contact lists:
• Personal Contacts
• Internal Contacts
• External Contacts