User guide

Mitel
®
5304 IP Phone User Guide – Issue 1, September 2009 Page 37
Call Features
Using Remote Programming to Change DND Settings
See “Using Do-Not-Disturb (DND)” on page 41 for more information about using DND.
To use Remote Programming to turn on DND:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To use Remote Programming to turn off DND:
Follow steps 1 - 4 above, dial 371, and then hang up.
Using Remote Programming to Forward Calls
See “Manual Call Forwarding” on page 29 for more information about Manual Call Forwarding.
To use Remote Programming to turn on Manual Call Forwarding:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your (DISA) password.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your password followed by #.
5. Dial one of the following Call Forwarding feature codes:
• 355 (All)
• 356 (No answer)
• 357 (Busy)
• 358 (No Answer/Busy)
6. Do one of the following to specify a forwarding number:
• Enter an extension number.
• Dial the Outgoing Call access code (8 is the default code), and then dial the
number.
To turn off Call Forwarding:
Follow steps 1 - 4 above, dial 355, and then hang up.