User guide

Answering and Placing Calls
Page 20 Mitel
®
5304 IP Phone User Guide – Issue 1, September 2009
To use the dialpad to enter characters:
Press the dialpad buttons as shown in the following table.
For example, to enter May 31, you would use the following sequence:
1. In Alpha Mode, press 6 once to enter an “M.”
2. Press 2 once to enter an “A.”
3. Press 9 three times to enter a “Y.”
4. Press the Message button to switch to Numeric Mode.
5. Press the Transfer button to enter a space.
6. Press 3.
7. Press 1.
8. Press # or lift the handset to save the entry.
Dialing Station Speed-Dial Numbers
If you have assigned a speed dial entry to one of your programmable buttons, you can press
the button for one touch dialing (see page 21). If you do not have a speed-dial button, you can
access the speed-dial feature using the 382 feature code.
To dial a Station Speed-Dial number:
Lift the handset and do one of the following:
• Press the button you have assigned to the speed-dial number.
• Dial 382, and then enter the Station Speed-Dial location number (0 to 9).
• Dial 382, press (Up) or (Down) to scroll through the speed-dial locations,
and then press # to select the location.
The system dials the number.
Button Characters Represented (in Alpha Mode)
0 @ : . , 0
1 - & ( ) 1
2 A B C ‘ 2
3D E F ! 3
4G H I * 4
5 J K L # 5
6 M N O ñ 6
7P Q R S 7
8T U V ? 8
9 W X Y Z 9