User guide

Getting Started
Page 4 Mitel
®
Model 5212/5224 Endpoint User Guide– Issue 2, October 2008
Endpoint Feature Descriptions
The following sections describe default configurations. Your endpoint may be programmed
differently. Contact your system administrator for more information. See “Model 5212 Features”
on page 2 and “Model 5224 Features” on page 3 for endpoint feature locations.
Handset
The handset provided with this equipment is hearing aid compatible (HAC). If you are using a
headset or if you are in Handsfree Mode, you do not need to use the handset. See “Headset
Instructions” on page 7 and “Using Handsfree Mode” on page 29 for more information.
Display
The display provides a two-line, 20-character viewing area for using features and identifying
callers. When idle, the display shows user information and the time and date.
Display Buttons
The Model 5224 (only) has three Display buttons under the Display. In some features, the left
and right Display buttons provide back (<<) and forward (>>) navigation. The center Display
button always displays user and system information. See “Viewing Your System Information” on
page 31 for more information.
Ring/Message Indicator
The Ring/Message Indicator flashes or stays lit to indicate call, message, and feature activity.
For more information about messaging features, see “Messages” on page 39. Ring/Message
Indicator signals are described in the following table.
Speaker
The speaker provides audio for handsfree calls and background music. See “Using Handsfree
Mode” on page 29 for information about handsfree calls. See “Listening to Background Music”
on page 12 for more information about background music.
Indicator Signals Description
Rapidly flashing You have an incoming call.
Slowly flashing You have a waiting message or callback message.
On You are on a call or using a feature.
Off Your endpoint is idle.
NOTE
The Model 5212 uses half-duplex audio when using the speakerphone (both
parties cannot talk at the same time).