Specifications

Administering the phone system 87Final
Phones The system maintains a list of all of the phones that are plugged in and
connected to the network at your company.
Configure Mitel 5485 paging unit
To configure a Mitel 5485 paging unit for use in your company, follow these
steps:
1 Follow the vendor documentation to physically connect the Mitel 5485
paging unit into your network
2 Add a location in the system. The location extension will be used as the
paging unit's extension. See Add a location on page “Add a location” on
page 15..
3 Select Phone Inventory in the left menu.
4 Select the Phone Label corresponding to the MAC address of the 5485
paging unit.
5 Select the location from the Assigned User/Location list.
6 Click Save.
The paging unit is now available to receive calls. Whenever anyone uses the
paging feature, the paging unit will be one of the devices through which the
page is broadcast.
If you configure the paging unit to have the Handsfree Answerback
feature, then Intercom calls to the paging unit have no time limit. If you do
not configure the paging unit to have the Handsfree Answerback feature,
then the maximum length of time for an Intercom call is the same as the
Paging feature limit.
Unassign phone
To remotely log a user or location out of their telephone, follow these steps:
1 Select Users and Locations in the left menu.
2 Select the Last Name for the selected user or location.
3 Click Unassign.
4 Click Save.