Specifications

Administering the phone system 47Final
coverage to an external number.
Modify a hunt group
To modify an existing hunt group, follow these steps:
1 Select Call Groups in the left menu.
2 Select the Name corresponding to the hunt group that you want to modify.
3 Modify the hunt group name if required. The Name field cannot be left
blank.
4 Modify the hunt group type in the Type list (optional).
5 Modify the Queue checkbox if necessary.
6 Modify the hunt group Call Behavior (optional).
7 To configure the hunt group calls to ring on idle group member phones,
select Only ring phones not is use option.
8 To configure the hunt group calls to ring on all group member phones,
even if the group member is already on a call, select the Ring all phones
option.
When Ring all phones option is selected, incoming hunt group calls are
still queued when group member phones are ringing because of a call to
the same hunt group.
9 Modify the Members of Call Group list for the selected hunt group if
required.
10 If you choose to lock users to the call group, clear the Allow members to
leave group? check box (optional).
11 From the After 'x' rings send call to next member list, select how many
times you would like a hunt group member’s phone to ring before the call
is transferred to the next member (optional).
12 Modify Call Coverage for the selected hunt group (optional).
13 Click Save.
If a hunt group has no members assigned to it, or if all members are
logged out of their phones, the call goes immediately to call coverage.