Specifications

Using the phone system

To answer a call occurring on the primary group member's phone, follow these steps:

1. When the Monitor Call/Monitor Call Silent key is flashing, lift the handset.

2. Press the Monitor Call/Monitor Call Silent key.

Press the Monitor Call/Monitor Call Silent key to answer the call in speaker mode.

Monitor Phone on the Telematrix 3000

Using the Monitor Phone feature, your phone can be monitored by other users. To enable the

Monitor Phone feature, contact your administrator and provide a list of users that you would

like to have monitor your phone. The administrator will create a Monitor group in your name

with the people in your list as members of the group. There is no other action that needs to be

taken on your part. When you are using your phone members of your call group will be able to

see that the phone is in use provided that they have programmed a memory key to view activity

on your phone.

When you use your phone a member of your Monitor group will see the LED of the memory

key that they have programmed to monitor your phone light up.

Mute on Telematrix 3000

Using Mute, you can silence any sound from the phone. This does not prevent incoming sound

from being heard. Press the Mute key during a call to activate Mute. The LED on the key

indicates when Mute is active.

One touch speed dial on the Telematrix 3000

Using One Touch Speed Dial, you can make a call to a pre-programmed number. To use this

feature, a programmable key must be programmed as a One Touch Speed Dial. See “Program

memory keys” on page 93.

To use One Touch Speed Dial, choose one of the following:

• Lift the handset and press the One Touch Speed Dial key.

• Press an available Line Appearance key, to activate the speakerphone, and then press

the One Touch Speed Dial key.

•Press the One Touch Speed Dial key. This will select an available Line Appearance and

activate the speakerphone.

Page on the Telematrix 3000

Using Page, you can send a page to all of the phones at your site. The page is broadcast

through the speaker of each available phone. To use this feature, you must have a memory

key programmed as a Page key. See “Program memory keys” on page 93.

Note: By putting a call on hold, either the primary group member or other Monitor phones

can pick up the call.