Specifications

Mitel IP Phone User Reference Guide
78
Handsfree answerback on the Telematrix 3000
Using Handsfree answerback, you can have intercom calls automatically answered so that
you have a two-way speech connection. See “Intercom to co-worker on the Telematrix 3000”
on page 78.
Press the Handsfree answerback key to turn the feature on. Press the key a second time to
turn the feature off. The LED on the programmed key indicates when the Handsfree
answerback feature is turned on.
To be able to activate and deactivate this feature with a key, you must have a key programmed
with Handsfree answerback. See “Program memory keys” on page 93.
You can also enable the feature without a key by checking the box for Handsfree Answerback
on your Personal Details page. See “Change user details” on page 90.
Hold on the Telematrix 3000
Using Hold, you can put an active call on hold, and make other calls. The LED of the Line
Appearance key flashes to indicate the call is on hold.
To place a call on hold, follow these steps:
1. While on an active call, press the hold key.
The indicator light next to the active Line Appearance changes from green to red and flashes
slowly.
2. To remove the call from hold, press the Line Appearance key.
Intercom to co-worker on the Telematrix 3000
Using Intercom to Co-worker, you can make a page to a selected co-worker that is broadcast
through speaker on your co-worker's phone. Pick up the handset or select a Line Appearance
key, then press the Intercom to Co-worker key to start the page to your co-worker. If you
press the Intercom to Co-worker key with no line active, the next available line appearance key
will automatically be selected. Note that if your phone is active on a call or in a ringing state,
you must select an available line appearance key before pressing the Intercom to Co-worker
key.
If your co-worker has the Handsfree Answerback feature configured and activated, then you
will also be able to hear your co-worker speak. See “Handsfree answerback on the Telematrix
3000” on page 78.
To use this feature, you must have a key programmed with Intercom to Co-worker. See
“Program memory keys” on page 93.
Join/Leave group on the Telematrix 3000
Using the Join/Leave Group feature you can join a Broadcast, Hunt, or Rollover call group of
which you are a member, using your phone. Only the phones of members who are joined in
the group ring when the call group is called.