Specifications

Using the phone system
69
Speaker on the 5212 IP phone
Using Speaker, you can turn the speakerphone on your phone on and off. To use Speaker,
press the key.
Transfer call on the 5212 IP phone
Using Transfer, you can transfer a call from one phone to another. To transfer a call, follow
these steps:
1. While on an active call, press the key. The system places the call on hold, and
the LCD screen displays:
2. Enter the extension or phone number of the person to whom you wish to transfer, or press
a One-Touch Speed Dial button.
3. Press the key once you hear ringing. The LCD screen displays the message
"Transfer Complete" for approximately five seconds before returning to an idle state.
If you enter an invalid extension during a transfer, the LCD screen displays "Invalid Extension".
To reconnect with the caller, follow these steps:
1. Press the key.
2. Press the flashing Line Appearance key.
3. Try to transfer the call again.
If you choose not to complete the transfer, press the key, then press the flashing
Line Appearance key to retrieve the original call.
Note: To cancel the retrieval of the parked call, press the key.
If you enter a park location where there is no caller on hold, the phone LCD will briefly
display "No Parked Call".
There are nine park locations available (1 through 9). If all park locations are in use when
you try to park a call, the phone LCD will briefly display "Park Locations Full" and the call
will be placed on hold.
If the call is left parked for 30 seconds, the phone of the person who parked the call will
beep and the phone’s LCD will briefly display "Call parked at: " with the park location
number to remind you that the call has not been retrieved.
Transfer To:
Transfer To: 415
Note: Instead of pressing the key immediately you can wait until the
destination answers and then press the key.