Specifications

Mitel IP Phone User Reference Guide

2. To make an internal call, dial the extension. To make an external call, dial the prefix required

for external dialing (usually 9) followed by the number you want to call.

3. When you finish dialing the number, the call is placed.

4. If you place an internal call, the LCD displays the extension and name of the connected

party once the call is answered. If you place an external call, the LCD screen displays the

name of the connected party, or if the name is unknown, just the phone number.

5. To switch between two active calls, press the flashing Line Appearance key. This puts the

active call on hold and activates the other call.

Ending one call keeps the second call on hold. To reconnect to the second call, press the

flashing Line Appearance key.

Using features via the 5212 IP phone

This section explains the features available from your 5212 IP phone. Some of these features

must be pre-programmed in order to be available. To learn how to program features to keys,

see “Program memory keys” on page 93.

3-way call on the 5212 IP phone

Using 3-Way Call, you can set up a phone call among three separate parties.

To activate 3-Way Call, follow these steps:

1. While on an active call, press the key twice. This places the first call on hold, and

selects an available Line Appearance. The LCD screen displays:

2. Enter the phone number of the third party.

The system dials the number and displays a "Calling" message along with the caller ID on

the first line of the LCD screen.

320

Calling: Robin Jones

320: Robin Jones

Conf with:

Calling: Lesley Greene