Specifications

Using the phone system

• End the first call by replacing the handset. The phone will start ringing. Pick up the handset

again to answer the second call.

To switch between two active calls, press the flashing Line Appearance key. This puts the active

call on hold, and activates the other call.

Making a call on the 5212 IP phone

To make a call, follow these steps:

1. Lift the handset. This will select the next available Line Appearance. You can also start

dialing the number without lifting the handset. This will automatically select the next avail-

able Line Appearance and operate in speakerphone mode.

2. To make an internal call, dial the extension. To make an external call, dial the prefix required

for external dialing (usually 9) followed by the number you want to call.

When you finish dialing the number, the call is placed.

If you place an internal call, your LCD displays the extension and name of the connected

party once the call is answered. If you place an external call, the LCD screen displays the

name of the connected party, or if the name is unknown, the phone number.

3. To end the call, replace the handset.

• To end the call before you have completed dialing, choose one of the following:

• Replace the handset if using the handset.

• Select the key if using the speakerphone.

Making a second call on the 5212 IP phone

To make a second call while on an active call, follow these steps:

1. Press any available Line Appearance key. This puts the active call on hold and provides

dial tone for a second call.

Note: If the display shows )) prior to the number calling, this indicates that it is a second

call.

320

Calling: Robin Jones

320: Robin Jones

Note: To use the speakerphone for step 1, press an available Line Appearance key or

the key instead of lifting the handset.