Specifications

Mitel IP Phone User Reference Guide
54
Using the 5212 handset
To answer your phone using the handset, follow these steps:
1. Lift the handset.
• Alternatively, you may choose to use one of the following methods:
- Press the flashing Line Appearance key.
- Press the key on the 5212 IP phone.
You have now answered the call. The LCD displays the caller's name (if known).
Using the 5212 speakerphone
To switch from the handset to the speakerphone during a call, follow these steps:
1. Press the key on the 5212 IP phone.
2. Replace the handset.
3. To end a call while using the speakerphone, press the key on the 5212 IP phone.
Switch from speakerphone to handset on the 5212 IP phone
To switch from the speakerphone to the handset during a call, pick up the handset.
To end the call while using the handset, replace the handset.
Answering a second call on the 5212 IP phone
A second incoming call causes three things to happen: (1) the phone rings once, (2) a line
appearance flashes, and (3) the LCD displays the number and the name of the caller, if the
caller is known.
To answer a second call, choose one of the following:
• Press the flashing Line Appearance key. This puts the active call on hold and answers the
second call.
321: Robin Jones
Note: If you choose to ignore the incoming call and select a different line appearance,
the line appearance continues to flash but the phone stops ringing.
))321: Robin Jones