Specifications

Using the phone system

2. To make an internal call, dial the extension. To make an external call, dial the prefix required

for external dialing (usually “9”) followed by the number you want to call.

3. When you finish dialing the number, the call will be placed.

4. If you place an internal call, your LCD screen displays the extension and name of the

connected party once the call is answered. If you place an external call, the LCD displays

the name of the connected party, or if the name is unknown, just the phone number.

5. To switch between two active calls, press the flashing Line Appearance key. This puts the

active call on hold and activates the other call.

Ending one call keeps the second call on hold. To reconnect to the second call, press the

flashing Line Appearance key.

Using features via the phone

This section explains the features available from your phone. Some of these features must be

pre-programmed in order to be available. To learn how to program features to keys, see

“Program memory keys” on page 93.

3-way call

Using 3-Way Call, you can set up a phone call among three separate parties.

To activate 3-Way Call, follow these steps:

1. While on an active call, press the CONF softkey. This places the first call on hold, and

selects an available Line Appearance. The LCD screen displays:

2. Enter the phone number of the third party.

3. The system dials the number and displays a “Calling” message along with the caller ID on

the first line of the LCD screen.

4. When the third party answers the call, the LCD will show that a connection is established.

320

Calling: Robin Jones

END

320: Robin Jones

TRANS CONF END

Conf with:

DIR QUIT

Calling:Lesley Gr

QUIT

Lesley Greene

CONF QUIT