Specifications

Mitel IP Phone User Reference Guide
104
A Calling pop-up window is displayed with the Originating Extension set to your extension.
3. Confirm that the Destination Number displayed matches the phone number you want to
use. If the number is not the same, enter an alternate number.
4. Select the Call button.
The call is initiated on the selected phone in speaker mode.
When the party you are calling answers the call, you can continue the call in speaker mode or
you can lift the handset.
Print a directory
To print a directory, follow these steps:
1. Select Internal Directory or External Directory in the Navigation pane.
Sorting the directory first will control the order of users in the printed directory.
2. Select the Print List button to display a printable version of the directory.
3. Select Print button in the browser window.
4. Return to the directory by selecting the Close Window button.
Dynamic site
The Dynamic Site Support feature allows telephone users to create their own dynamic site from
any location with an IP connection to the service provider. The service provider can provision
this capability for any telephone user. Your company administrator cannot provision this
capability.
If this capability is enabled, you will be presented with an extra web page - "My Dynamic Site"
on the web interface. By logging in to the web interface and selecting this new page, you will
then be presented with the option to create a dynamic site or to release one. This capability
requires that you have a specially configured phone provided by your service provider.
When you select the button to create a dynamic site, the system automatically detects the router
to which your computer is connected and then provisions a site using that router address. You
then re-boot your phone (disconnect and reconnect the power). It will obtain an IP address
locally and then register with the phone service using the newly created dynamic site. The site
persists as long as you are connected. If your phone is disconnected, the site will persist for a
certain amount of time (typically 1 hour after the phone is disconnected and a minimum of 2
hours after the site was created).
When you select the button to release a dynamic site, the system deletes that site and logs out
any user logged in at that site.
Note: If your call is not answered, terminate the call on your phone by lifting and replacing
the handset or by selecting the Speaker key.