User guide

Technician’s Handbook
58
Configure the analog line parameters
1. Choose Voice from the Selection menu.
2. Click Lines and Trunks, click Analog Lines and then
click Analog Line Parameters.
3. Select the line and click Change.
4. Set the required line parameters.
5. Click Save.
Configure the ring maps
1. Click Lines and Trunks, click Line and Trunk Man-
agement, and then click Ring Map.
2. Select the line and click Change.
3. Configure the Day and Night Entries for the line.
4. Click Save.
Configure the ring map type
1. Click Lines and Trunk Management and then click
Ring Map Type.
2. Select the line and click Change.
3. Select either Standard or Cyclic.
If you have programmed more than one extension
group in the Ring Map form, you should set the Ring
Type to Cyclic.
4. Click Save.
Program the digital trunks
Digital trunks are supported by the following option
modules
• T1/E1 Plus module