User guide
Table Of Contents
- Table of Contents
- Chapter 1 Introduction
- Chapter 2 Installation
- Chapter 3 Programming
- Programming overview
- About the programming tools
- Enable your options
- Programming the system parameters
- Programming the extensions
- Programming the voice parameters
- Modify the extensions and system directory
- Program the terminal emergency numbers (ELINs)
- About the default line numbers
- Program the general line parameters
- Program the analog lines
- Program the digital trunks
- Assign priority lines
- Restrict external access (toll restriction/call barring)
- Program the voice management parameters
- Programming the voice mail settings
- Setting up the auto attendant
- Configuring call logging (SMDR)
- Programming a loudspeaker
- Committing your changes
- Performing a database backup
- Programming tips
- Chapter 4 Configuring the IP network
- About IP networking
- Network capabilities
- Planning your LAN
- IP programming sequence
- Connecting directly to the Internet
- Connecting to the Internet through an existing LAN
- Using a remote DHCP server
- Changing the assigned DHCP IP address range
- Configuring Domain Name Service
- Assigning a gateway
- Programming dial-up access to an ISP
- Configuring NAT Redirect
- Restricting LAN access (firewall)
- IP networking tips
- Chapter 5 Routine maintenance
- Is the system healthy?
- Is the system secure?
- Checking the system
- Launching the tools
- Enabling your licensed options
- Rebooting the system
- Powering down the system
- Powering up the system
- Upgrading the system
- Performing backups
- Saving call (SMDR) logs
- Using a remote access session
- Changing extensions or set types
- Creating a user guide
- Using a database template
- Maintenance tips
- Chapter 6 Troubleshooting and repair
- Checking the system LEDs
- Checking the logs
- Viewing diagnostics
- Using maintenance commands
- Using Windows networking commands
- Line troubleshooting
- IP port troubleshooting
- IP phone troubleshooting
- Analog phone troubleshooting
- System troubleshooting
- Network troubleshooting
- Fixing database or software corruption
- Replacing faulty components
- Troubleshooting tips
- Appendix A Default database
- Appendix B Reference
- Appendix C Planning
- Index

Table of Contents
v
Committing your changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Performing a database backup . . . . . . . . . . . . . . . . . . . . . . . . 79
Programming tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Chapter 4 : Configuring the IP network
About IP networking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Network capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Planning your LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Default controller IP addresses . . . . . . . . . . . . . . . . . . . . . . . . 86
IP programming sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Connecting directly to the Internet . . . . . . . . . . . . . . . . . . . . . 87
Using Static IP addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Using Broadband Access (cable modem). . . . . . . . . . . . . . . . 89
Using Broadband Access (PPPoE). . . . . . . . . . . . . . . . . . . . . 90
Commit your changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Connecting to the Internet through
an existing LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Through the WAN port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Through a layer-2 switch port (custom configuration) . . . . . . . 94
Using a remote DHCP server . . . . . . . . . . . . . . . . . . . . . . . . . . 96
What you need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Configuring the 3100 ICP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Changing the assigned DHCP IP address range . . . . . . . . . . 99
Configuring Domain Name Service. . . . . . . . . . . . . . . . . . . . 101
Assigning a gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Programming dial-up access to an ISP. . . . . . . . . . . . . . . . . 104
Configuring NAT Redirect . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Restricting LAN access (firewall) . . . . . . . . . . . . . . . . . . . . . 109
Connecting the 6000 MAS to the layer-2 switch port . . . . . . 109
Connecting the 6000 MAS to the WAN port . . . . . . . . . . . . . 112
SonicWALL SOHO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
IP networking tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Chapter 5 : Routine maintenance
Is the system healthy? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
System health checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Is the system secure?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124










