User Guide

MiVoice 6930 IP Phone User Guide for MiCloud Connect
12
• Auto Answer
• Sending an incoming call to voicemail
• Adjusting the ring and listening volume
• Turning off the phone’s ringer
• Muting a call
• MobileLink
Placing Calls
To place a call, you can use the handset, the speakerphone, or a headset.
Using The Handset To Place A Call
1. To place a call, pick up the handset and dial a phone number.
2. To end the call, hang up the handset.
Using Handsfree Speakerphone
The handsfree feature allows you to speak to someone without using the handset or headset. Your
phone must be in either the Speaker or Speaker/Headset audio mode. For more information about
setting the audio mode on your phone, see Audio on page 54.
• To dial using handsfree, first press and enter a number at the dial tone.
• If you are in Speaker audio mode, lift the handset and press to switch between handsfree
and handset.
• If you are in Speaker/Headset audio mode, press to switch between handsfree and
headset.
• When the handset is on hook, press to disconnect the call.
Using The Headset To Place A Call
The headset feature allows you to speak to someone without using the handset or speakerphone.
Your phone must be in either the Headset or Headset/Speaker audio mode. For more information
about setting the audio mode on your phone, see Audio on page 54.
1. To place a call using the headset, press and dial the phone number.
The LED next to the hardkey blinks red, and the call is dialed.
2. To end the call, press the button again.
The LED next to the hardkey stops blinking.
Note: The call timer on the 6930 IP phone starts after the call is answered.
Note: When handsfree is on, the LED next to the hardkey turns on.