Programming instructions

Basic Installation

Note: 5215 and 5010 IP phones will fail to register on a system that has a

Default or Premier database because of the line appearances programmed

on keys 8 and 10—keys that exist on the 5207 but not on the 5215 or the

5010. To register these phones, first delete the line appearances in Form

09, or follow the phone replacement procedure on the next page to delete

all key programming.

Note: Release 4.0 will not install the 5330/5340 firmware load on systems

using 256 MB CompactFlash. To use the full feature set of this phone with

the SX-200 ICP, you need a 512 MB CompactFlash or an internal hard

drive. Flash-based systems that do not plan to use this phone can upgrade

to Release 4.0 without hardware changes.

Note: