User guide

Technician’s Handbook
86
4. Click Change. In the DHCP Server field, choose
Disable.
5. From the Advertise as Default Gateway menu,
choose Not this system.
6. Click Save.
7. Click Router, click Network Interface, and then
select the IP address of the Net 3 destination at the
top of the right page.
8. Click Change.
9. Complete the following
Destination: Net 3
IP Address source: Static
IP Address: (enter the static IP address)
Bitmask: (enter the Subnet Mask)
10. Click Save
After you save your database, you will lose your
connection to the network. You will need to
reconnect with the new static IP addresses.
If you connected to the 3100 ICP system through the
WAN port, you will need to change your computer’s
IP address.
11. Commit the database.
12. Go to Configuring the external DHCP server (p. 86).
Configuring the external DHCP server
You perform the following steps on the external server
that is providing the DHCP services for your LAN.
1. Launch the system tool. See Launching the tools (p.
113).
2. Choose IP Networking from the Selection menu.
3100 Hand.bk Page 86 Monday, August 19, 2002 8:49 PM