User guide

Technician’s Handbook
82
Figure 10: Internet connection through router (WAN port)
1. Connect a cable from the WAN port on the controller
to the port on the router or layer-2 switch of the cus-
tomer’s existing LAN.
2. Connect your laptop to a layer-2 switch port on the
controller.
3. Launch the system tool. See Launching the tools (p.
113).
4. Choose IP Networking from the Selection menu.
5. Click Router and then click WAN Ethernet.
6. Click Change.
7. Check the Enable WAN Link box.
8. Choose Static from the IP Address Source menu.
9. Scroll down to the Static IP section.
3100 Hand.bk Page 82 Monday, August 19, 2002 8:49 PM