User guide

Technician’s Handbook
60
3. Click Add.
4. Enter the global restriction string. You can enter up to
eight digit strings that no extension can dial (for
example 1900).
5. Click Save.
Set the Toll Restriction Matrix
You can either allow or prevent
• Line to line routing (default is no)
• Line to line transfer (default is no)
• Line to line three-party conference (default is yes)
1. Choose Voice from the Selection menu.
2. Click Management, click Toll Restriction, and then
click Toll Restriction Matrix.
3. Click Change.
4. Configure the Toll Restriction Matrix settings. These
settings are system-wide.
5. Click Save.
Program the voice management parameters
1. Choose Voice from the Selection menu.
2. Click Management.
3. Program the required parameters into the following
web pages in the order listed below:
– Out Access
– Timers (see page 170 for defaults)
– Least Cost Routeing (BRI - UK only).
4. The remaining parameters, default to typical values.
Change them as desired.
3100 Hand.bk Page 60 Monday, August 19, 2002 8:49 PM